doc. no : qw0905-LG1030 rev. : b date : 28 - jun - 2005 data sheet tower type led lamps LG1030 ligitek electronics co.,ltd. property of ligitek only
?? 0.5 typ 25.0min note : 1.all dimension are in millimeter tolerance is ? 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. directivity radiation 2.54typ 1.0min part no. LG1030 8.0 4.5 1.5max 3.5 2.5 2.0 package dimensions 4.8 ligitek electronics co.,ltd. property of ligitek only page 1/4 100% 50% 75% -60 x -30 x 50% 25% 0 25% 100% 75% 0 x 60 x 30 x
-40 ~ +85 t opr operating temperature peak wave length f pnm viewing angle 2 c 1/2 (deg) note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. gap LG1030 green green diffused emitted lens 2.6 30 1.7 565 max. min. 7.5 60 4.5 min. typ. typical electrical & optical characteristics (ta=25 j ) material part no color forward voltage @20ma(v) spectral halfwidth ??f nm luminous intensity @10ma(mcd) tsol soldering temperature storage temperature tstg max 260 j for 5 sec max (2mm from body) -40 ~ +100 j j ma 30 i f forward current reverse current @5v ir peak forward current duty 1/10@10khz power dissipation i fp pd 10 g a 120 100 ma mw absolute maximum ratings at ta=25 j parameter symbol g ratings unit part no. LG1030 ligitek electronics co.,ltd. property of ligitek only page 2/4
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( j ) relative intensity@20ma wavelength (nm) forward voltage@20ma normalize @25 j fig.4 relative intensity vs. temperature ambient temperature( j ) relative intensity@20ma normalize @25 j typical electro-optical characteristics curve forward voltage(v) fig.1 forward current vs. forward voltage forward current(ma) page forward current(ma) fig.2 relative intensity vs. forward current relative intensity normalize @20ma ligitek electronics co.,ltd. property of ligitek only 1.0 0.1 1.0 10 100 1000 1.0 10 100 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40 -20 0 20 40 60 1.0 1.1 1.2 500 550 600 650 0.0 0.5 1.0 2.0 3.0 4.0 5.0 80 100 0.8 0.9 -20 -40 40 20 080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 3.5 g chip 3/4 part no. LG1030
mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. solderability test this test intended to see soldering well performed or not. 1.t.sol=230 j? 5 j 2.dwell time=5 ? 1sec thermal shock test solder resistance test high temperature high humidity test the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles 1.t.sol=260 j? 5 j 2.dwell time= 10 ? 1sec. the purpose of this test is the resistance of the device under tropical for hous. 1.ta=65 j? 5 j 2.rh=90 %~95 % 3.t=240hrs ? 2hrs mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202:103b jis c 7021: b-11 ligitek electronics co.,ltd. property of ligitek only operating life test 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) this test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. low temperature storage test high temperature storage test the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) the purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) reliability test: test item test condition description part no. LG1030 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 jis c 7021: b-12 mil-std-883:1008 jis c 7021: b-10 reference standard page 4/4
w h h w c/no: made in china i t e m n o . q ' t y : p c s n , w , : k g s g , w , : k g s 3. 12 inner boxes / carton size : l x w x h 58cm x 34cm x 34cm l l 2. 10 bag / inner box size : l x w x h 33cm x 19cm x 8cm 1. 500pcs / bag packing specification
|
